The ArtdeSicko is formulated for the purpose of express sio2 coating for the car paint protection. In all seasons, especially in winter. This chemical can be exposed to water in one hour and during application, the temperature is not the issue.
The chemical select is to get a gentle and deep colour gloss once in contact. Both cristobalite and polydimethylsiloxane are used to get a hybrid process and to have water resistance and also a light gelation. This will make the coating functional better bonding to paint and also last longer.
Preparation for Pre-coating:
Pre-coating preparation for the chemical application process is important as such the covalent bond is achieved. This bonding will eventually affect the durability of the coating on the applied surface. Below is the pre-coating on all the surface needs to be treated with coating:
Before applying chemical ArtDeSicko, clean the surface with alcohol, silicon remover or ArtDeSwap.
Apply ArtDeSicko on surface in circular motion, wait for 5 to 10 minutes then buff off with the micro cloth.
Continue the process on the intended surface.
ArtDeSicko is dry-to-touch after about one hour.
Within 7 days, you can wash the coating with plain water without shampoo. This will prevent any complication to the coating. Even rains on the first day after two hours upon application, the coating is still intact.
It is advisable not to wash the car with any harsh shampoo and APC or anything liquids that contain alcohol. This will damage the hydrophobic properties.
Try not to contact with water for the first two-hour. If contacted, make dry to prevent white spot.
Cleaning and Maintenance:
Surfaces coated with ArtDeSicko should be cleaned with cleaners in the pH range 3 – 6. Strong (mineral) acids or alkalis should be avoided and are also unnecessary as neutral cleaners are generally sufficient to clean vehicles coated with ArtDeSicko.
The instructions on the accompanying Safety Data Sheet must always be followed. Wear solvent-resistant gloves (e.g. butyl or nitrile rubber gloves) when applying the product. The solution must not be mixed or diluted with other solvents. Must be kept out of reach of children. The product must be stored in a cool, dry place (< 25°C).